Air source heating installation in Ely

Clarity Heating offer Air source heating installation in Ely. Air Source heating runs on electricity and relies on a heat pump (sometimes called a “air to water” heat pump) to absorb heat from the outside air and use it to heat your home via radiators and/or supply hot water.

DID YOU KNOW? Air source heating is actually not a new invention - the technology has been around 40 years, so it's very much a tried and tested way to heat your home

The pumps work in a very similar way in extracting heat from the outside air as a fridge extracts heat from it’s inside to cool your food. These heat pumps are able to do this even when the outside temperature is as low as -15°C.

How Air source heating works:  1. Air source heat pump takes in air from outside 2. Using Electricity, the pump compresses the air and releases it at a higher temperature to heat water in your system 3. Heat is then sent to radiators and/or underfloor heating - the remainder is stored in a hot water cyclinder/butter tank 4. Stored hot water can be used for showers baths and taps

Efficient, long life span and low annual maintenance costs

An expertly installed and good quality unit is highly efficient. Highly efficient being anything from 300-450% efficiency this means that for every unit of electric used the pump creates up to 3 to 4.5 units of heat output. The system works by delivering a constant low temperature flow of water to your radiators, meaning you can have them on more often because they use less power. The life span of a Air Source heating system is also very long, expected at over 20 years, and incurs very low annual maintenance costs.

So, what’s the catch? The up front cost is higher than for a traditional heating system using gas, oil or LPG.

Can Air Source Heating work in any home or office?

Basically yes. Air Source Heating can be installed in a new build or extension, refurbishment or retro-fitted to houses and commercial buildings with natural gas, oil, LPG or electric heating. The biggest savings will be seen where it replaces Oil and LPG boilers.

What else do I need to consider?

There are a few things to consider when looking at installing Air Source Heating if you want to see the greatest savings from your investment:

Insulation – a home that is well insulated is essential. If you haven’t addressed this area of heating efficiency, we advise that you do so first.

Replacement – ideally you will be replacing an oil or LPG boiler. Although this is not mandatory to the installment, this is where the best savings are to be made.

Radiators – existing radiators will need to be measured and checked to ensure they are the correct size for the pump to work at it’s most efficient level. Alternatively, that you have under floor heating installed already (UFH).

Cylinder – if you want the air source pump to also provide you with hot water then it is likely you will need a hot water cylinder that is suitable. These types of cylinders require a coil with a high surface area to allow for maximum heat extraction. In most cases your existing cylinder will not be up to this specification.

If you would like to know more about the difference between a traditional hot water cylinder and the type of cylinder needed to provide hot water via an air source heat pump – our article on Heating your home with renewable energy might be useful.

How much will it cost to have Air Source Heating installed?

We are able to do a complete installation of air source heating systems on your behalf or you can, if you wish, use a preferred plumber to install radiators and cylinder (if needed) – leaving us to concentrate on the supply and installation of the air source heat pump.

Typical costs: £5000 – £10,000, with an average of £7000
Typical savings: Average saving of approx £500-£900 per year
(based on a typical four bedroom detached home, running on oil)

If you are thinking of installing Air Source heating in your home you may be able to get money back for every unit of heat you generate.

If you would like Clarity Heating to visit your home or premises and prepare an estimate for an air source heating installation please contact us via our request a quote form, or by calling us on 01353 862315.

Further information about Air source heating

We’ve got lots of useful information on our website, here are just some of the pages you might be interested in:

Interested in renewable energy? Visit our article on Heating your home with renewable energy or more information.

A basic guide to: Radiators and flow temperature
Learn why choosing the right size radiators for your heating system and understanding the flow temperature is important to heating your home or office efficiently.

Central Heating Installations – boilers, flue pipes, radiators and heating controls
Our professional engineers can do everything from installing a boiler to a complete heating system for your home, community building or office.

New efficient boilers from Viessmann
A superior range of boilers from one of our recommended manufacturers. Read our latest blog post on the efficiency rating of the most popular models.

Landlords must have an annual gas safety check by law and many homeowners are obliged to by their insurance company, but this doesn’t mean appliances are hazard-free for another year. And it certainly doesn’t guarantee they’re running cost-effectively. So as well as monitoring your boiler’s
If you're remodelling your home or upgrading your boiler you may want to think about repositioning your heating system to a completely different location.
Clarity Heating has extensive social distancing measures in place that enable us to keep repairing and replacing our customers’ essential heating appliances during the coronavirus outbreak. Here are some of the most frequently asked questions to reassure you that we are here for you. Can